Shifter M/T: Service and Repair

Removal Procedure





1. Remove the shift cables from the shifter assembly.
2. Disconnect the shift interlock cable.





3. Remove the two front mounting bolts.





4. Remove the two rear mounting bolts and the shifter.

Installation Procedure





1. Position the shifter on the studs and install the front two nuts.





2. Install the two rear bolts.

Notice: Refer to Fastener Notice in Service Precautions.

3. Tighten the nuts to 25 Nm (18 ft. lbs.)

4. Install the shift cables. Refer to Shift Cables.
5. Install the console.