Radio Replacement

RADIO REPLACEMENT

REMOVAL PROCEDURE




1. Remove the instrument panel cluster trim plate. Refer to Trim Plate Bezel Replacement - IP Cluster in Instrument Panel, Gauges and Warning Indicators.
2. Depress the spring clip retainers (1) at the sides of the radio (2).




3. Pull the radio straight out to remove.

INSTALLATION PROCEDURE




1. Install the radio into the instrument panel.
2. Ensure the spring clips are fully engaged.
3. Install the instrument panel cluster trim plate. Refer to Trim Plate Bezel Replacement - IP Cluster in Instrument Panel, Gauges and Warning Indicators.
4. Reprogram the radio. Refer to Radio Setup. Radio Setup