Scan Tool Data Definitions

8 DIGIT GM PART NUMBER: The scan tool displays an 8 digit numeric number. The part number of the module.

AMPLIFIER: The scan tool displays Present or Not Present. The scan tool displays Present when the Amp sense wire has been grounded to signal that an amplifier is present.

ANTENNA SIGNAL: The scan tool displays 0-300 dBuV.

BAND NUMBER: The scan tool displays AM / FM1 / FM2. The current band that the radio is in.

CALIBRATION ID: The scan tool displays 0-9999. The number designating what calibrations the module contains.

CASSETTE CUT TAPE: The scan tool displays 0-999. The number of cut tape errors the radio has recorded.

CASSETTE INSERTED: The scan tool displays Yes / No. The scan tool displays Yes when a tape has been inserted in the radio.

CASS. LOAD/UNLOAD ERRORS: The scan tool displays 0-999. The number of cassette loading and unloading errors the radio has recorded.

CASSETTE METAL: The scan tool displays Metal / Not Metal. The scan tool displays Metal when it detects that a metal tape has been inserted in the radio.

CASSETTE SIDE: The scan tool displays Top / Bottom. The scan tool displays Top when the tape is playing side A.

CASSETTE TIGHT TAPE: The scan tool displays 0-999. The number of cassette tight tape errors the radio has recorded.

CD CHANGER: The scan tool displays Connected / Not Connected. The scan tool displays Connected when the radio receives Class 2 information from the CD changer.

CD CHANGER TRACKING ERRORS: The scan tool displays 0-999. The number of CD tracking errors the CD changer has recorded.

CD FOCUS ERRORS: The scan tool displays 0-999. The number of CD focus errors the radio or CD changer has recorded.

CD INSERTED: The scan tool displays Yes / No. The scan tool displays Yes when a CD has been inserted in the radio.

CD LOAD/UNLOAD ERRORS: The scan tool displays 0-999. The number of CD loading and unloading errors recorded.

CD TRACKING ERRORS: The scan tool displays 0-999. The number of CD tracking errors recorded.

COMPONENT SERIAL # 8-11: The scan tool displays 0-9999. The first portion of the serial number.

COMPONENT SERIAL # 12: The scan tool displays 0-9. The second portion of the serial number.

COMPONENT SERIAL # 13: The scan tool displays 0-9. The third portion of the serial number.

DRIVER NUMBER: The scan tool displays Driver 1-2. The memory position the driver has selected as received by Class 2 lines.

JULIAN DATE OF BUILD: The scan tool displays 0-999. The day of the year that the module was built.

NEW VIN COUNTER: The scan tool displays 0-99. The number of times a new VIN number has been set in the radio.

PHONE: The scan tool displays Present or Not Present. The scan tool displays Connected when the radio receives Class 2 information from the phone module.

PRESET CONTROL: The scan tool displays Preset 1-6 when the radio is on a preset station, or Not A Preset when the radio is not on a preset station.

PROM ID: The scan tool displays 0-9999. The identification number of the modules internal PROM.

SEQUENCE NUMBER: The scan tool displays 0-9999.

SINGLE CD TRACK NUMBER: The scan tool displays 00-19. The scan tool displays the current track of the CD in the CD player.

SOURCE: The scan tool displays CD / CD Changer / Tuner / Tape. The scan tool displays the current mode the radio is in.

STEERING WHEEL CONTROLS: The scan tool displays 0-999 counts. The signal in counts as received from the steering wheel controls.

THEFT ARMED: The scan tool displays Learned VIN / No VIN. The Scan tool displays Learned VIN when the theft mode has been turned ON by recognizing a valid VIN #.

THEFT LOCK: The scan tool displays Locked / Unlocked. The scan tool displays Unlocked when the radio receives the correct VIN information from the PCM via Class 2.

TOTAL CASSETTE HOURS: The scan tool displays 0-999 hrs. The total number of hours the cassette player has been used.

TOTAL CD HOURS: The scan tool displays 0-999 hrs. The total number of hours the CD player has been used.

TOTAL CD/MD HOURS: The scan tool displays 0-999 hrs. The total number of hours the CD changer has been used.

TOTAL RADIO HOURS: The scan tool displays 0-999 hrs. The total number of hours the radio has been used.

YEAR MODULE BUILT: The scan tool displays a 1990- 2020. The production year the module was manufactured.