Scan Tool Data Definitions

8 DIGIT GM PART NUMBER: The scan tool displays an 8 digit number which indicates the GM part number of the module.

# OF FOBS PROGRAMMED: The scan tool displays 1 Fob - 4 Fobs to indicate the number of keyless entry transmitters that are programmed for the system.

CALIBRATION ID: The scan tool displays a 4 digit number which indicates the calibration ID number of the module.

INVALID TRANSMITTER: The scan tool displays More Than 10 or Less Than 10 which indicates how many times an invalid transmitter has been used in the vicinity of the vehicle.

KEY FOB 1 LOW VOLTAGE: The scan tool displays counts

KEY FOB 1 BATTERY STATU: The scan tool displays

KEY FOB 2 LOW VOLTAGE: The scan tool displays counts

KEY FOB 2 BATTERY STATU: The scan tool displays

KEY FOB 3 LOW VOLTAGE: The scan tool displays counts

KEY FOB 3 BATTERY STATU: The scan tool displays

KEY FOB 4 LOW VOLTAGE: The scan tool displays counts

KEY FOB 4 BATTERY STATU: The scan tool displays

KEY PRESSED ON FOB: The scan tool displays Dr. Door Unlock, Door Lock, All Door Unlock, Trunk, or Fuel Door/Alarm which indicates which keyless entry transmitter button was last pressed to operate the keyless entry system.

LAST FOB USED: The scan tool displays Fob#1- Fob#4 which indicates the number of the last keyless entry transmitter used.

PROM ID: The scan tool displays a 4 digit number which indicates the ID number of the PROM associated with the module.