77. Timing Chain and Sprocket Installation
Timing Chain and Sprockets InstallationTools Required
J36660-A Torque Angle Meter
1. Install the timing chain on the sprockets. Align the timing marks.
2. Install the timing chain, the crankshaft sprocket, and the camshaft sprocket.
Notice: Refer to Special Fastener Notice in Service Precautions.
Notice: Refer to Fastener Notice in Service Precautions.
3. Install the camshaft sprocket bolt.
^ Tighten the camshaft sprocket bolt to 100 Nm (74 ft. lbs.). Use J 36660-A to tighten the camshaft sprocket bolt an additional 90 degrees.
4. Install the timing chain dampener.
^ Tighten the timing chain dampener bolt to 22 Nm (16 ft. lbs.).