Seat Temperature Switch: Service and Repair
Heated Seat Switch Replacement
Removal Procedure
1. Remove the console trim plate.
2. Disconnect the heated seat switch electrical connector.
3. Remove the fastener (4).
4. Remove the heated seat switch (1).
Installation Procedure
1. Install the heated seat switch (1) into the center console trim plate.
Notice: Refer to Fastener Notice in Service Precautions.
2. Install the fastener (4).
Tighten fastener to 2 N.m (18 lb in).
3. Connect the electrical connector.
4. Install the console trim plate.