Fuel Tank Pressure Sensor: Service and Repair
FUEL TANK PRESSURE SENSOR REPLACEMENTREMOVAL PROCEDURE
1. Remove the rear compartment floor trim.
2. Remove the fuel sender access panel bolts.
3. Remove the fuel sender access panel.
Fuel Tank Pressure Sensor:
4. Disconnect the fuel tank pressure sensor electrical connector.
5. Remove the fuel tank pressure sensor.
INSTALLATION PROCEDURE
Fuel Tank Pressure Sensor:
1. Install the fuel tank pressure sensor.
2. Connect the fuel tank pressure sensor electrical connector.
NOTE: Refer to Fastener Notice in Service Precautions.
3. Install the fuel sender access panel.
4. Install the fuel sender access panel bolts.
Tighten
Tighten the fuel sender access panel bolts to 2 N.m (18 lb in).
5. Install the rear compartment floor trim.