Tilt Spring - Disassemble

1. Remove the upper and lower trim covers.
Steering Column Trim Covers - Disassemble

2. Use the tilt lever to tilt the column in the UP position.





Caution: Refer to Tilt Spring Caution in Service Precautions.

3. Remove the tilt spring (1).
3.1. Pry the tilt spring up until a bulge occurs and most of the tilt spring tension is removed.
3.2. Secure the tilt spring and continue prying until the tilt spring disengages from the post on the steering column support assembly (2) and the steering column tilt head assembly (3).





4. Remove the spring guide (1) from the tilt spring (2).