Windshield Wiper & Washer Switch - Disassemble

1. Remove the upper and lower trim covers.
Steering Column Trim Covers - Disassemble

2. Remove the wire harness assembly from the wire restraint clip (1).
3. Remove the wire harness straps.





4. Disconnect the windshield wiper and washer switch assembly connector.
5. Remove the windshield wiper and washer switch assembly in the following way:
5.1. Press on the locking tabs of the windshield wiper and washer switch assembly.
5.2. Pull the windshield wiper and washer switch assembly out of the signal switch housing.