10. Wiring Harness - Disassemble

Wiring Harness - Disassemble





1. Using a small screwdriver, pry the wiring harness (224,225) electrical connectors off of the following components:
^ Automatic transaxle fluid -pressure manual valve position switch assembly (395)
^ 1-2, 3-4 Shift solenoid valve assembly (315A)
^ 2-3 Shift solenoid valve assembly (31513)
^ TCC PWM solenoid valve assembly (334)
^ Pressure control solenoid valve assembly (322)
^ Automatic transaxle input speed sensor assembly (440)
^ IMS (811)
2. Gently pull the automatic transaxle fluid temperature sensor (391) from its clip.





3. Lift the wiring harness assembly (224,225) off of the transaxle.