Scan Tool Data Definitions

8 DIGIT GM PART NUMBER: The scan tool displays the eight digit part number of the DDM.

BATTERY VOLTAGE: The scan tool displays 9.0-15.0 volts. The state of the battery voltage supplied to the DDM.

CALIBRATION ID: The scan tool displays the calibration or program revision level used in the PROM of the DDM.

COMPONENT SERIAL # 8-11: The scan tool displays digits 8 through 11 of the DDM serial number.

COMPONENT SERIAL # 12: The scan tool displays digit 12 of the DDM serial number.

COMPONENT SERIAL # 13-1: The scan tool displays digits 13-16 of the DDM serial number.

COMPONENT SERIAL # 17-1: The scan tool displays digits 17-18 of the DDM serial number.

DRIVER DOOR AJAR SW.: The scan tool displays On/Off. The driver door lock switch input to the DDM, where an open door is displayed as On.

DRIVER DOOR CYLINDER SW.: The scan tool displays Idle/Lock/Unlock. The driver door cylinder switch input to the DDM, where the switch transition to the Lock or Unlock positions are displayed as Lock and Unlock.

DRIVER DOOR JAMB SW.: The scan tool displays On/Off. The driver door jamb switch input to the DDM, where an open door is displayed as On.

DRIVER DOOR LOCK OUTPUT: The scan tool displays Idle/Lock/Unlock. The driver door lock switch output from the DDM, where the switch transition to the Lock or Unlock positions are displayed as Lock and Unlock.

DRIVER DOOR LOCK SW.: The scan tool displays Idle/Lock/Unlock. The driver door cylinder switch input to the DDM, where the switch transition to the Lock or Unlock positions are displayed as Lock and Unlock.

DRIVER LF WINDOW SW.: The scan tool displays Idle/Up/Down/Express Dwn. The driver LF window switch input to the DDM, where the switch transition to the Up, Down or Express Down positions are displayed as Up, Down and Express Dwn.

DRIVER LR WINDOW SW.: The scan tool displays Idle/Up/Down. The driver LR window switch input to the DDM, where the switch transition to the Up or Down positions are displayed as Up and Down.

DRIVER MIRROR OUTPUTS: The scan tool displays idle/Left/Right/Up/Down. The driver mirror switch output from the DDM, indicating which direction the driver mirror is being commanded to move.

DRIVER MIRROR SELECTORS: The scan tool displays Off/Driver/Passenger. The driver mirror switch input to the DDM, where the switch transition to the Driver or Passenger positions are displayed as Driver and Passenger.

DRIVER MIRROR SWITCHES: The scan tool displays idle/Left/Right/Up/Down. The driver mirror switch input to the DDM, indicating which direction the driver mirror should be commanded to move.

DRIVER RF WINDOW SW.: The scan tool displays Idle/Up/Down/Express Dwn. The driver RF window switch input to the DDM, where the switch transition to the Up, Down or Express Down positions are displayed as Up, Down and Express Dwn.

DRIVER RR WINDOW SW.: The scan tool displays Idle/Up/Down. The driver RR window switch input to the DDM, where the switch transition to the Up or Down positions are displayed as Up and Down.

DRIVER WINDOW OUTPUT: The scan tool displays Idle/Up/Down. The driver window switch output from the DDM, where the switch transition to the Up or Down positions are displayed as Up and Down.

JULIAN DATE OF BUILD: The scan tool displays a four digit number representing the day of the year the DDM was built.

LEFT REAR DOOR AJAR SW.: The scan tool displays On/Off. The left rear door lock switch input to the DDM, where an open door is displayed as On.

LEFT REAR DOOR JAMB SW.: The scan tool displays On/Off. The left rear door jamb switch input to the DDM, where an open door is displayed as On.

L.R. DOOR LOCK OUTPUTS: The scan tool displays Idle/Lock/Unlock. The left rear door lock switch output from the DDM, where the switch transition to the Lock or Unlock positions are displayed as Lock and Unlock.

L.R. DOOR WINDOW OUTPUT: The scan tool displays Idle/Up/Down. The LR door window switch output from the DDM, where the switch transition to the Up or Down positions are displayed as Up and Down.

LT. HORIZ. MIRROR POS.: The scan tool displays 0.25-3.75 volts. The driver mirror position sensor feedback voltage to the DDM.

LT. REAR DOOR WINDOW SW: The scan tool displays Idle/Up/Down. The left rear window switch input to the DDM, where the switch transition to the Up or Down positions are displayed as Up and Down.

LT. VERTICAL MIRROR POS: The scan tool displays 0.25-3.75 volts. The driver mirror position sensor feedback voltage to the DDM.

PASS. DOOR CYLINDER SW.: The scan tool displays Idle/Lock/Unlock. The driver door cylinder switch input to the DDM, where the switch transition to the Lock or Unlock positions are displayed as Lock and Unlock.

PASS. DOOR JAMB SW.: The scan tool displays On/Off. The passenger door jamb switch input to the DDM, where an open door is displayed as On.

PASS. DOOR LOCK OUTPUTS: The scan tool displays Idle/Lock/Unlock. The driver door lock switch output from the DDM, where the switch transition to the Lock or Unlock positions are displayed as Lock and Unlock.

PASS. DOOR LOCK SWITCH: The scan tool displays Idle/Lock/Unlock. The driver door cylinder switch input to the DDM, where the switch transition to the Lock or Unlock positions are displayed as Lock and Unlock.

PASS DOOR WINDOW OUTPUT: The scan tool displays Idle/Up/Down. The passenger door window switch output from the DDM, where the switch transition to the Up or Down positions are displayed as Up and Down.

PASS. DOOR WINDOW SW.: The scan 1001 displays Idle/Up/Down/Express Dwn. The passenger window switch input to the DDM, where the switch transition to the Up, Down or Express Down positions are displayed as Up, Down and Express Dwn.

PASSENGER DOOR AJAR SW.: The scan tool displays On/Off. The passenger door lock switch input to the DDM, where an open door is displayed as On.

PASSENGER MIRROR OUTPUTS: The scan tool displays Idle/Left/Right/Up/Down. The passenger mirror switch output from the DDM, indicating which direction the passenger mirror is being commanded to move.

PROM ID: The scan tool displays the four digit number of the PROM incorporated into the DDM.

RIGHT REAR DOOR AJAR SW: The scan tool displays On/Off. The right rear door lock switch input to the DDM, where an open door is displayed as On.

R.R. DOOR LOCK OUTPUTS: The scan tool displays Idle/Lock/Unlock. The right rear door lock switch output from the DDM, where the switch transition to the Lock or Unlock positions are displayed as Lock and Unlock.

R.R. DOOR WINDOW OUTPUT: The scan tool displays Idle/Up/Down. The RR door window switch output from the DDM, where the switch transition to the Up or Down positions are displayed as Up and Down.

RT. HORIZ. MIRROR POS.: The scan tool displays 0.25-3.75 volts. The passenger mirror position sensor feedback voltage to the DDM.

RT. REAR DOOR JAMB SW.: The scan tool displays On/Off. The right rear door jamb switch input to the DDM, where an open door is displayed as On.

RT. REAR DOOR WINDOW SW: The scan tool displays Idle/Up/Down. The right rear window switch input to the DDM, where the switch transition to the Up or Down positions are displayed as Up and Down.

RT. VERTICAL MIRROR POS: The scan tool displays 0.25-3.75 volts. The passenger mirror position sensor feedback voltage to the DDM.

WINDOW LOCKOUT SW.: The scan tool displays Idle/Active. The driver door window lockout switch input to the DDM, where Active indicates that the passenger, LR and RR window switches are locked out.

YEAR MODULE BUILT: The scan tool displays the four digit year of build of the DDM.