Instrument Panel (IP) - Air Deflector/Louver Replacement

REMOVAL PROCEDURE




1. Grasp the center of the air outlet vent.
2. Using a wide flat blade, carefully pry on the edge of the air outlet vent and pull rearward.
3. Remove the air outlet vent.
4. Disconnect the electrical connector, it equipped.

INSTALLATION PROCEDURE




1. Connect the electrical connector, if equipped.
2. Align the air outlet vent to the Instrument Panel (IP) opening.
3. Push the air outlet vent into the opening until the retainers are engaged.
4. Test for proper operation and movement.