Brake Light Switch: Service and Repair

Stoplamp Switch Replacement
Removal Procedure
1. Remove the left sound insulator.





2. Rotate the stoplamp/ABS/shift lock switch (2) counterclockwise, then pull to remove the switch.
3. Disconnect the electrical connectors from the switch.

Installation Procedure





1. Connect the stoplamp/ABS/shift lock switch electrical connectors to the stoplamp switch (2).
2. Install the stoplamp switch into the retainer.
3. Press the switch (2) into the retainer until the switch plunger is fully depressed into the switch barrel.
4. Rotate the switch (2) clockwise until travel has stopped and the switch locks fully into position.
5. Install sound insulator.