Lighting System Indicators
HIGH BEAMThe IPC illuminates the high beam indicator when the Dash Integration Module (DIM) detects that the high beams are requested. The IPC receives a class 2 message from the DIM requesting illumination.
HIGH BEAM (WITH HUD)
The Head Up Display (HUD) illuminates the high beam indicator when the Dash Integration Module (DIM) detects that the high beams are requested. The HUD receives a class 2 message from the DIM requesting illumination.
TURN SIGNALS
The left and right turn signal indicators are hard wired to the turn signal switch and the hazard switch. The turn signal indicator illuminates when the turn signal lamps supply voltage circuit is active. If the IPC determines that the turn signal is active for more than 1.29 km (0.8 mile), the IPC sends a class 2 message to the radio in order to activate an audible warning.
TURN SIGNALS (WITH HUD)
The left and right turn signal indicators in the Head Up Display (HUD) are hard wired to the turn signal switch and the hazard switch. The turn signal indicator illuminates when the turn signal lamps supply voltage circuit is active.
TURN SIGNAL ON? -20 (WITH DIC)
The IPC illuminates the TURN SIGNAL ON? - 20 indicator in the DIC when the PC determines that the turn signal is active for more than 1.29 km (0.8 mile). The IPC also sends a class 2 message to the radio in order to activate an audible warning.