Scan Tool Data Definitions - Climate Control Panel (CCP)

AMBIENT LIGHT SENSOR: The scan tool displays 0-5 volts. The ambient light sensor input signal, 0.09-4.75 volts is the normal operating range.

FRONT FOG LAMP SWITCH: The scan tool displays On/Off. The state of the front fog lamp switch.

INTERIOR DIM POT: The scan tool displays 0-5 volts. The IP dimmer switch input signal, 0.09-4.75 volts is the normal operating range.

INTERIOR LAMP SWITCH: The scan tool displays On/Off. The state of the interior lamp switch.

KEY CYLINDER HALO LAMP: The scan tool displays On/Off. The commanded state of the key cylinder halo lamp.

TWILIGHT DELAY POT: The scan tool displays 0-5 volts. The twilight delay switch input signal, 0.09-4.75 volts is the normal operating range.