Scan Tool Data Definitions - Dash Integration Module (DIM)

BATTERY VOLTAGE: The scan tool displays 0-20 Volts. The voltage as received on the battery positive voltage circuit of the Module.

DAYTIME RUNNING LAMP: The scan tool displays On/Off. The commanded state of the daytime running lamp relay.

FLASH TO PASS SWITCH: The scan tool displays On/Off. The state of the flash to pass switch.

FRONT FOG LAMP RELAY: The scan tool displays On/Off. The commanded state of the front fog lamp relay.

HEAD LAMP SWITCH: The scan tool displays On/Off. The state of the flash to pass switch signal. On indicates the flash to pass headlamps are requested on.

HIGH BEAM OUTPUT (FLASH): The scan tool displays On/Off. The commanded state of the high beam relay.

INCANDESCENT DIM 1: The scan tool displays On/Off. The state of the incandescent lamp ground circuit.

LIGHTS ON WITH WIPERS: The scan tool displays On/Off. The state of the wiper/washer system.

LOW BEAM OUTPUT: The scan tool displays On/Off. The commanded state of the low beam relay.

PARK LAMP: The scan tool displays On/Off. The state of the park lamp switch.

PARK LAMP RELAY OUTPUT: The scan tool displays On/Off. The commanded state of the park lamp relay.