SIR Steering Wheel Module Coil - Disassemble

Important: Before performing the following procedures, check the fused jumper assembly for burned 2 amp fuses.

1. Remove the upper and lower trim covers.
Steering Column Trim Covers - Disassemble

2. Remove the wire harness assembly from the wire restraint clip (1).
3. Remove the wire harness straps.





4. Remove the black inflatable restraint steering wheel module coil connector from the fused jumper assembly connector.





5. Remove the retaining ring (1) using snap ring pliers.
6. Remove the inflatable restraint steering wheel module coil (2).
7. Remove the wave washer (3).