DTC 035

CIRCUIT DESCRIPTION
The body control module (BCM) contains the content theft deterrent (CTD) system logic. In order for the CTD system to function properly, the BCM must sense the presence of the security indicator LED as an input. During every ignition cycle, the BCM attempts to sense to presence of the LED indicator. If this DTC is NOT set, the CTD system will not function.

CONDITIONS FOR SETTING THE DTC
DTC 25 is set as a current DTC when the BCM detects the security LED when the ignition is turned to the ON position.

DTC 35 is set as a history DTC when the BCM detects the security LED at any time since the codes were last cleared.

ACTION TAKEN WHEN THE DTC SETS
DTC 35 is required for content theft deterrent system operation. The security LED must be detected for the CTD system to function.

TEST DESCRIPTION

Steps 1-9:

The numbers below refer to the step numbers on the diagnostic table.
3. This step tests the operation of the security indicator LED.