Front Door Striker: Service and Repair

Door Striker Replacement

Removal Procedure

1. Open the door to gain access to the striker.




2. Remove the screws (5) attaching the striker (4) to the jamb (2).
3. Remove the shims (3) and the striker (4).

Installation Procedure




1. Position the striker (4) and shims (3) to the lock pillar (2).
2. Loosely install the striker screws.
3. Close the door to align the striker.

Notice: Refer to Fastener Notice in Service Precautions.

4. Open the door and tighten the striker screws.

Tighten the striker screws to 24 N.m (18 lb ft).

5. Perform the lock striker adjustment. Refer to Door Lock Striker Adjustment.