Rear Compartment Lift Window Strut Replacement

Rear Compartment Lift Window Strut Replacement

Removal Procedure

1. Raise the coupe rear liftgate and support.




2. Remove the bolt (4) from rear liftgate strut rod (3) and body.

Important: A flat-blade screwdriver may be used if necessary to pry strut from mount with care not to damage strut.

3. Remove the rear lift panel strut (2) from the rear trunk lid mount (1) and remove from vehicle.

Installation Procedure






Important: Ensure that the strut end "snaps" into place then tug on strut end to ensure it is securely installed.

1. Install the rear lift panel strut (2) to the rear trunk lid mount (1).

Notice: Refer to Fastener Notice in Service Precautions.

2. Install the bolt (4) to rear liftgate strut rod (3) and body.

Tighten the bolt (4) to 27 N.m (20 lb ft).

3. Remove the support and close the liftgate.