Park Brake Shoe Inspection

Park Brake Shoe Inspection
1. Raise and support the vehicle. Refer to Vehicle Lifting.
2. Remove the tire and wheel assembly.
3. Remove the rear brake rotor. Refer to Brake Rotor Replacement - Rear.
4. Inspect the park brake shoe and lining for the following conditions:
- Excessive wear indicated by the park brake lining being worn down to the shoe
- Brake lining cracking
- Oil or fluid contamination of the brake lining
5. If any of the above conditions were found, replace the park brake shoe/lining. Refer to Park Brake Shoe Replacement.
6. Adjust the park brake. Refer to Park Brake Adjustment.
7. Install the rear brake rotor. Refer to Brake Rotor Replacement - Rear.
8. Install the tire and wheel assembly.
9. Lower the vehicle.