| Balance Shaft | End Play | 0.0-0 .0067 Inch (in) |
| Rear Journal Diameter | 1.4994 - 1.5002 Inch (in) |
| Radial Play-Front, Bearing Clearance | 0.0 - 0.0010 Inch (in) |
| Rear Bearing to Journal Clearance | 0.0005 - 0.0043 Inch (in) |
| Drive Gear Lash | 0.002 - 0.0049 in |
| Bearing Bore Diameter-Front | 2.0462 - 2.0472 Inch (in) |
| Bearing Bore Diameter-Rear, In Block | 1.8735 - 1.8745 Inch (in) |
| Bearing Inside Diameter-Rear | 1.5007 - 1.5037 Inch (in) |
| Balance Shaft Driven Gear Bolt | First Pass | 16 Foot Pound-Force (ft.lb) |
| Final Pass | 70 degrees |
| Balance Shaft Retainer Bolt | | 22 Foot Pound-Force (ft.lb) |