V7 - Direct Mount

TOOLS REQUIRED
^ J 33023-A Puller Pilot
^ J 41552 A/C Compressor Pulley Puller
^ J 41790 A/C Compressor Holding Fixture




1. Remove the A/C compressor from the vehicle.
2. Clamp the A/C compressor holding fixture, J 41790 in a vise and attach the A/C compressor to the J 41790.




3. Remove the clutch plate and hub assembly.
4. Using external snap ring pliers (1), remove the clutch rotor and bearing assembly retaining ring (3).




5. Place the J 33023-A on the clutch rotor.




6. Install the J 41552 down into the inner circle of slots in the rotor.
Turn the J 41552 clockwise in the slots to engage the puller tangs with the rotor.
7. Hold the J 41552 in place and use a wrench to turn the center forcing screw against the J 33023-A to remove the clutch rotor and bearing assembly.