Closeout/Insulator Panel Replacement - Left

REMOVAL PROCEDURE




1. Remove the push-in retainers (2).
2. Unhook the tab on the instrument panel (IP) insulator (1) from the retaining feature on the dash mat.
3. Lift the flange on the IP insulator (1) out of the kick panel.

INSTALLATION PROCEDURE




1. Align the IP insulator (1) to the bottom of the IP.
2. Lift the flange on the IP insulator (1) over the kick panel.
3. Install the tab on the IP insulator (1) into the retaining feature on the dash mat.
4. Install the push-in retainers (2).