EVAP Hoses/Pipes - Canister/Fuel Tank

REMOVAL PROCEDURE




1. Remove the fuel tank
2. Remove the Evaporative Emission (EVAP) purge pipe (7) from the EVAP canister.
3. Remove the EVAP canister vent valve hose (5).
4. Remove the EVAP pipe to fill limiter vent valve pipe (3).
5. Cap the EVAP pipes in order to prevent possible EVAP system contamination.

INSTALLATION PROCEDURE




1. Remove the caps from the fuel and EVAP pipes.
2. Install the EVAP pipe to fill limiter vent valve pipe (3).
3. Install the EVAP canister vent valve hose (5).
4. Connect the EVAP purge pipe (7) to the EVAP canister.
5. Install the fuel tank.