Air Cleaner Fresh Air Duct/Hose: Service and Repair
AIR CLEANER INTAKE DUCT REPLACEMENTREMOVAL PROCEDURE
1. Release the fasteners located at the front of the air cleaner duct/resonator assembly.
2. Release the button fasteners located at the rear of the air cleaner duct assembly.
3. Loosen the hose clamp from the air intake duct at the air cleaner duct assembly.
4. Loosen the hose clamp from the air intake duct at the throttle body assembly.
5. Remove the air intake duct from the air cleaner duct/resonator assembly.
INSTALLATION PROCEDURE
1. Position the air intake duct at the front of the air cleaner assembly.
2. Position the air intake duct onto the front of the throttle body unit.
NOTE: Refer to Fastener Notice in Service Precautions.
3. Securely fasten the hose clamp at the air cleaner assembly.
Tighten
Tighten the clamp to 2 N.m (18 lb in).
4. Securely fasten the hose clamp at the throttle body assembly.
Tighten
Tighten the clamp to 2 N.m (18 lb in).
5. Position the air cleaner assembly onto the radiator support.
6. Install the button fasteners located at the rear of the air cleaner assembly.