Left Front (Coupe)

REMOVAL PROCEDURE




1. Remove the plug (3) from the bolt (2).
2. Remove the bolt (2) that attaches the plate (1) to the rocker panel.
3. Remove the plate.
4. Pull the webbing (4) and the plate (1) out of the shoulder belt guide.
5. Lower the rear portion of the headliner finishing trim panel. Refer to Headliner Replacement.




6. Remove the bolts (2) that attach the belt (1) to the rear roof panel.
7. Remove the belt (2) from the rear roof panel.

INSTALLATION PROCEDURE




1. Connect the belt (1) to the rear roof panel.

NOTE: Refer to Fastener Notice in Service Precautions.

2. Install the bolts (2).

Tighten
Tighten the bolts to 28 N.m (20 lb ft).

3. Raise the rear portion of the headliner finishing trim panel back into position. Refer to Headliner Replacement.




4. Route the webbing (4) and the plate (1) through the shoulder belt guide.
5. Install the plate (1) to the rocker panel.
6. Install the bolt (2).

Tighten
Tighten the bolt to 42 N.m (31 lb ft).

7. Install the plug (3) to the bolt (2).