Right Front (Convertible)

REMOVAL PROCEDURE




1. Remove the cargo area front trim panel.
2. Remove the plug (2) from the bolt (3).
3. Remove the bolt (3) that attaches the plate (4) to the rocker panel.




4. Remove the bolt (1) from the shoulder belt guide.
5. Remove the bolt (2) from the retractor-side shoulder belt (3).
6. Remove the retractor-side belt (3).

INSTALLATION PROCEDURE




1. Install the retractor-side belt (3).

NOTE: Refer to Fastener Notice in Service Precautions.

2. Install the bolt (2) to the retractor-side shoulder belt.

Tighten
Tighten the bolt to 42 N.m (31 lb ft).

3. Install the bolt (1) to the shoulder belt guide.

Tighten
Tighten the bolt to 42 N.m (31 lb ft).




4. Install the bolt (3) that attaches the plate (4) to the rocker panel.

Tighten
Tighten the bolt to 42 N.m (31 lb ft).

5. Connect the plug (2) to the bolt (3).
6. Install the cargo area front trim panel.