Front (Right)

Wheel Speed Sensor Jumper Harness Replacement - Front (Right)
Removal Procedure





1. Raise and support the vehicle. Refer to Vehicle Lifting.
2. Disconnect the wheel speed sensor connector (1).
3. Remove the jumper harness from the retaining clip.
4. Remove the grommet retainer at the inner lender.
5. Remove the harness cover from the right strut tower.
6. Disconnect the upper jumper harness connector.
7. Pull the grommet through the inner fender pass-through and remove the jumper harness.

Installation Procedure





1. Route the new jumper harness through inner fender pass-through.
2. Connect the upper jumper harness connector.
3. Install the harness cover on the right strut tower.
4. Install the grommet retainer at the inner fender.
5. Install the jumper harness from the retaining clip.
6. Connect the wheel speed sensor connector (1).
7. Lower the vehicle.