Rear (With Traction Control)

Wheel Speed Sensor Jumper Harness Replacement - Rear (With Traction Control)
Removal Procedure





1. Raise and support vehicle. Refer to Vehicle Lifting.
2. Disconnect the wheel speed sensor connectors (2,3).
3. Remove the jumper harness grommet from the retainer.
4. Remove the upper jumper harness connector from the rear body pass-through connector.

Installation Procedure





1. Install the upper jumper harness connector to the rear body pass-through connector.
2. Install the jumper harness grommet to the retainer.
3. Connect the wheel speed sensor connectors (2,3).
4. Lower the vehicle.