Blower Motor Switch: Service and Repair
BLOWER MOTOR SWITCH REPLACEMENTREMOVAL PROCEDURE
1. Remove the HVAC control assembly.
2. Remove the HVAC control assembly blower knob (1) off.
3. Remove the HVAC control assembly blower switch screw (2).
4. Remove the HVAC control assembly blower switch (3).
INSTALLATION PROCEDURE
1. Install the HVAC control assembly blower switch (3).
2. Install the HVAC control assembly blower switch screw (2).
Tighten
Tighten the HVAC control blower switch screw (2) to 2 N.m (18 lb in).
3. Remove the HVAC control assembly blower knob (1) on.
4. Install the HVAC control assembly.