Operation CHARM: Car repair manuals for everyone.

Lock Housing - Disassemble





1. Remove the steering column lock cylinder set. Refer to Steering Column Lock Cylinder Set - Disassemble - Off Vehicle.
2. Remove the column housing cover end cap (2). Remove the cruise control connector (3) from the base plate (1) and disconnect.





3. Remove the 3 pan head Lobed socket tapping screws: (1) at 12 o'clock, (2) at 3 o'clock and t3) at 8 o'clock.





4. Remove the lock housing cover and sleeve assembly (1). Remove the column housing cover end base plate (2) and the dimmer switch rod actuator (3).





5. Remove the switch actuator pivot pin (2).
6. Remove the windshield wiper and washer switch assembly (1) from the lock housing cover assembly.