Finding A Station

AM/FM:
Press this button in order to switch between AM, FM1, and FM2. The display shows the selection.

TUNE:
Press this knob lightly so the knob extends. Turn it to choose radio stations. Push the knob back into the stored position when not using it.

SEEK:
Press the up or down arrow in order to go to the next higher or lower station and stay there.

PUSH-BUTTONS:
The six numbered push-buttons let you return to the favorite stations. There can be up to 18 stations (six AM, six FM1 and six FM2). Perform the following steps:
1. Turn the radio on.
2. Press AM/FM to select the band.
3. Tune in the desired station.
4. Press and hold on of the six numbered buttons until SET appears on the display. Whenever you press that numbered button, the station that was set will return.
5. Repeat the steps for each push-button.

"For a description of the RPO Code(s) Shown in this article or any of the images therein, refer to the RPO Code List found at Vehicle/Application and ID." RPO Codes