Door Replacement - Front

REMOVAL PROCEDURE




1. Remove front side door trim.
2. Remove water deflector.
3. Remove electrical connectors from all components in door.
4. Remove wiring harness grommet (3) from door (1).
5. Remove crosscar and front side door wiring harness from door.
6. Remove door spring.
7. Support door in preparation for door removal.
8. Remove upper (2) and lower hinge nuts (4).
9. Remove door from vehicle.

INSTALLATION PROCEDURE




1. Install door to upper and lower hinges.

NOTE: Refer to Fastener Notice in Service Precautions.

2. Install upper (2) and lower hinge nuts (4).

Tighten
Tighten the nuts to 50 N.m (37 lb ft).

3. Install door spring.
4. Install crosscar and front side door wiring harness from door.
5. Install wiring harness grommet (3) from door (1).
6. Install electrical connectors from all components in door.
7. Install water deflector.
8. Install front side door trim.