Power Seat Switch: Service and Repair

Power Seat Switch Replacement

Removal Procedure




1. Remove the front bucket seat (1).
2. Remove the recliner trim cover (2) from the bucket seat (1).
3. Disconnect the wire harness from the power seat switch (3).
4. Remove the screws from the power seat switch (3), and remove the power seat switch from the recliner trim cover (2).

Installation Procedure






Notice: Refer to Fastener Notice in Service Precautions.

1. Install the power seat switch (3) to the recliner trim cover (2), and install the screws to the power seat switch.

Tighten the screws to 1.7 N.m (15 lb in).

2. Connect the wire harness to the power seat switch (3).
3. Install the recliner trim cover (2) to the bucket seat (1) and install the screws.

Tighten the screws to 1.7 N.m (15 lb in).

4. Install the bucket seat.