Visual and Physical Underhood Inspection

When you perform any diagnostic procedure or when you diagnose the cause of an emission test failure, Perform an underhood inspection. This procedure can often lead to repairing a problem without further steps. Use the following guidelines when you perform an underhood inspection:
^ Inspect all vacuum hoses for the following conditions:
- Incorrect routing
- Pinches
- Cuts
- Disconnected hoses
^ Inspect all wires in the engine compartment for the following conditions:
- Incorrect connections
- Burned or chafed spots
- Pinched wires
- Contact with sharp edges
- Contact with hot exhaust manifolds

This inspection is very important. Perform the inspection carefully and thoroughly.