Rear Axle - Assemble

Rear Axle-Assemble
1. Inspect all components for excessive wear and replace as necessary.
2. Perform pinion depth measurement and adjustment.
3. Install the differential drive pinion gear, bearing races, and new pinion seal to the housing.





4. Install the differential carrier to housing (7).
5. Perform side bearing preload adjustment and measurement.
6. Perform a backlash adjustment and measurement.





7. Install the axle shafts (4).





8. Install the rear axle housing cover and gasket.
9. Refill the rear axle lubricant.





10. Install the propeller shaft (2) to the vehicle.
11. Install the rear torque arm.
12. Lower the vehicle.
13. Inspect for proper operation of the rear axle.