Reverse Lockout Assembly Assemble

Reverse Lockout Assembly Assemble

Caution: The reverse lockout assembly is under spring pressure. Exercise caution when removing the retainer ring, as bodily iniury may result.





1. Install the reverse lockout plunger (6).

2. Install the reverse lockout outer spring (5).

3. Install the reverse lockout collar (4).

4. Compress the reverse lockout plunger and the collar (4) in a vise and Install the retainer ring (3).

5. Install the reverse lockout inner spring (2).

6. Install the reverse lockout components in the body (1).

7. Install the retainer ring (7).

8. Install the 0-ring to body (8).