Shift Control Closeout Boot Replacement

Shift Control Closeout Boot Replacement

Removal Procedure
1. Remove the control lever handle.
2. Remove the shift control closeout boot bolts (1).





3. Remove the shift control closeout boot (2).

Installation Procedure





1. Install the shift control closeout boot (1).
2. Push the shift control closeout boot (1) down until it seats on the control.

Notice: Refer to Fastener Notice in Service Precautions.





3. Install the shift control closeout boot bolts (1).
^ Tighten the shift control closeout boot bolts (1) to 2 Nm (18 inch lbs.).
4. Install the control lever handle.