Park Brake Shoe Inspection

Park Brake Shoe Inspection
1. Raise and support the vehicle. Refer to Vehicle Lifting.
2. Remove the tire and wheel.
3. Remove the rear brake caliper bracket with the rear brake caliper. Refer to Brake Rotor Replacement - Rear.
4. Remove the rear brake rotor. Refer to Brake Rotor Replacement - Rear.
5. Inspect and replace the park brake shoe and lining if any of the following conditions are found:
^ Excessive wear indicated by the park brake lining being worn down to the shoe
^ Brake lining cracking
^ Oil or fluid contamination of the brake lining
6. Adjust the park brake shoe. Refer to Park Brake Adjustment.
7. Install the rear brake rotor.
8. Install the rear brake caliper with the rear brake caliper bracket. Refer to Brake Rotor Replacement - Rear
9. Install the tire and wheel.
10. Lower the vehicle.