Camshaft Bearing

INTAKE





Using the J36660-A, install and tighten the bolts in sequence.

Rotate the bolts the amount of degrees specified in sequence.
^ Tighten the camshaft housing to cylinder head bolts to 22 Nm (16 ft. lbs.) + 90 degrees.
^ Tighten the camshaft housing cover to camshaft housing bolts to 22 Nm (16 ft. lbs.) + 30 degrees.


EXHAUST





Use the J36660-A, install and tighten the bolts in sequence.

Rotate the bolts the amount of degrees specified in sequence.
^ Tighten the camshaft housing to cylinder head bolts to 15 Nm (11 ft. lbs.) + 90 degrees.
^ Tighten the camshaft housing cover to camshaft housing bolts to 15 Nm (11 ft. lbs.) + 30 degrees.