| Crankshaft Bearing Clearance | 0.00039 - 0.0023 Inch (in) |
| Crankshaft End Play | 0.0034 - 0.0095 Inch (in) |
| Flange Runout Maximum | 0.00120 Inch (in) |
| Flywheel Fit | 0.0000 - 0.0005 in |
| ID Balancer | 1.2992 - 1.3004 Inch (in) |
| ID Of Seal Diameter On Crank | 3.2210 - 3.2299 Inch (in) |
| Runout Of Crankshaft At The Flywheel Flange Maximum | 0.002 Inch (in) |
| Runout Of Crankshaft Maximum | 0.002 Inch (in) |
| Straightness - Taper | 0.0003 Inch (in) |
| Stroke Of Crank | 3.70 in |
| Supported On Front And Rear Journals Clearance To The Crankshaft Position Sensor | 0.0303 - 0.0697 in |
| Timing Gear Fit To Crankshaft Snout | 1.3004 - 1.3016 in |
| Width, Main Thrust Bearing Journal No.3, Including Fillets | 1.0959 - 1.0989 Inch (in) |