Rear Quarter Upper Trim Panel Replacement (Sedan)

Rear Quarter Upper Trim Panel Replacement (Sedan)

Removal Procedure

1. Remove the rear seat bolster, if equipped.
2. Pull out the door weatherstrip as required.




3. Pull firmly and evenly in order to remove the upper quarter trim panel.
4. Remove the seat belt strap through the slot in the panel.
5. Remove the panel from the vehicle.

Installation Procedure




1. Position the upper quarter trim panel and align the retaining clips.
2. Install the seat belt in the trim panel T slot.
3. Press on the trim panel to ensure that the clips are engaged.
4. Install the door weatherstrips.
5. Install the rear seat bolster, if equipped.