Mirror Replacement - Remote

REMOVAL PROCEDURE




1. Remove the front door trim panel.
2. Align the notch in the outside rear view mirror remote control bezel (1) with the tab in the hole at the front of the armrest.
3. Push on the base of the outside rear view mirror remote control bezel in order to remove the bezel from the door trim panel.




4. Remove the front door inner panel mirror insulator (3).
5. Remove the outside rear view mirror nuts (2).
6. Remove the outside rear view mirror (1).

INSTALLATION PROCEDURE




1. Install the outside rear view mirror.
2. Install the outside rear view mirror nuts (2).

NOTE: Refer to Fastener Notice in Service Precautions.

3. Tighten the outside rear view mirror nuts in the following order:
3.1. Top
3.2. Forward
3.3. Rear

Tighten
Tighten the outside rear view mirror nuts to 10 N.m (89 lb in).




4. Install the front door inner panel mirror insulator (3).




5. Align the notch in the outside rear view mirror remote control bezel (1) with the tab in the hole at the front of the armrest.
6. Push on the outside rear view mirror remote control bezel (1) in order to secure the bezel.
7. Install the front door trim panel.