Low Traction Indicator Inoperative

Low Traction Indicator Inoperative





Circuit Description
The Low Traction indicator is controlled by the instrument cluster via serial data messages from the EBCM. When the ABS or TCS is active for 0.5 seconds, the EBCM commands the instrument cluster to turn ON the Low Traction indicator.

The Low Traction indicator will also turn ON during the instrument cluster bulb check. When the ignition switch is turned to ON, the Low Traction indicator will turn ON for approximately 3 seconds and then turn OFF.

Test Description
The numbers below refer to the step numbers on the diagnostic table.
2. Use the scan tool to check the normal state of the Low Traction indicator control.
3. Ensures that the instrument cluster can operate the Low Traction indicator.