Compressor Clutch Coil Removal

TOOLS REQUIRED
^ J 41790 Compressor Holding Fixture
^ J 8433 Compressor Pulley Puller
^ J 8433-3 Forcing Screw
^ J 33025 Clutch Coil Puller Legs
^ J 33023-A Puller Pilot




1. Install the compressor onto the J 41790.




2. Install the J 33023-A onto the front head of the compressor.
3. Remove the compressor clutch plate and hub assembly.
4. Remove the compressor rotor and bearing assembly. R




5. Mark the clutch coil terminal location (2) on the compressor front head.
6. Install the J 33025 onto the J 8433.
7. Install the J 8433 onto the compressor clutch coil (1) and tighten the puller leg bolts.
8. Tighten the center forcing screw J 8433-3 of the compressor pulley puller J 8433 against the puller pilot to remove the compressor clutch coil from the compressor.