Courtesy Lamp: Service and Repair
COURTESY LAMP REPLACEMENT - INSTRUMENT PANELREMOVAL PROCEDURE
1. From under the instrument panel, pull the bulb from the socket
2. Remove the IP end caps (1,3) in order to aide in gaining access to the lamp socket.
3. Rotate the socket counterclockwise to remove the socket from the bracket.
4. Release the electrical connector from the socket.
INSTALLATION PROCEDURE
1. Connect the electrical connector to the socket.
2. Position the socket into the bracket.
3. Rotate the socket clockwise to secure it to the bracket.
4. Push the bulb into the socket until fully seated.
5. Install the IP end caps (1 ,3).