Tilt Spring - Disassemble

Caution: Refer to Tilt Spring Caution in Service Precautions.





1. Use the tilt lever to move the tilt column into the UP position.
2. Pry the tilt spring (1) upward until a bulge occurs and most of the spring tension is removed.
3. Secure the tilt spring (1) with locking pliers.
4. Continue prying the tilt spring (1) until the tilt spring disengages from the post on the steering column support assembly, the steering column housing, and the bearing assembly.





5. Remove the tilt spring guide (1) from the tilt spring (2).