Clutch Actuator Cylinder Replacement
Clutch Actuator Cylinder ReplacementRemoval Procedure
1. Disconnect the clutch actuator cylinder line.
2. Remove the transmission.
3. Remove the clutch actuator cylinder body bolts.
4. Remove the upper line retainer bolt.
5. Remove the actuator.
Installation Procedure
1. Lubricate the inside diameter of the bearing with GM P/N 12345777, or equivalent.
2. Install the clutch actuator cylinder and the body bolts.
3. Install the upper line retainer bolt.
4. Install the transmission.
5. Connect the clutch actuator cylinder line.
6. Bleed the hydraulic system.