Clutch Pedal Position Switch Replacement
Clutch Pedal Position Switch ReplacementRemoval Procedure
1. Remove the instrument panel driver knee bolster.
2. Remove the electrical connector from the clutch pedal position switch.
3. Remove the clutch pedal position switch from the brake and accelerator and clutch pedal with the bracket.
Installation Procedure
1. Install the clutch pedal position switch to the brake and accelerator and clutch pedal with the bracket.
Notice: Refer to Fastener Notice in Service Precautions.
2. Install the electrical connector to the clutch pedal position switch and bolts.
^ Tighten the bolts to 10 Nm (89 inch lbs.).
3. Install the instrument panel driver knee bolster.